Authorized distributer of 
Reach out for discounts and promotions on packages and software
ERP CODE: 321195101
Software Subscription ERP CODE: 307010011
Product SN First 5 PreFix: 98934
The Launch Tech X-431 Torque Link (321195101) is a professional automotive diagnostic scan tool designed for automotive technicians, independent repair shops, and diagnostic specialists. Combining full-system vehicle diagnostics, bidirectional controls, topology mapping, and SmartLink C connectivity, this advanced diagnostic tablet helps technicians identify vehicle faults, perform diagnostic tests, and complete supported service procedures.
Designed for use with a wide range of domestic, Asian, and European vehicles, the X-431 Torque Link provides access to essential diagnostic functions, including reading and clearing diagnostic trouble codes (DTCs), monitoring live data, performing actuation tests, and accessing supported ECU coding and special functions.
The X-431 Torque Link enables technicians to diagnose multiple electronic systems from one platform. Its topology mapping feature provides a visual representation of vehicle control modules, allowing technicians to identify faulted systems and navigate directly to the relevant modules.
Bidirectional control capabilities allow technicians to activate supported vehicle components and evaluate their operation during troubleshooting. Automatic VIN identification further simplifies vehicle selection by retrieving information from compatible vehicles.
Equipped with the SmartLink C Vehicle Communication Interface (VCI), the X-431 Torque Link supports advanced communication protocols, including CAN FD and DoIP.
Its Tech 2 Tech remote diagnostic functionality enables technicians to collaborate with remote specialists for diagnostic assistance. The SmartLink C also supports J2534 pass-thru programming capabilities, subject to applicable OEM software, subscriptions, and authorization requirements.
The X-431 Torque Link offers diagnostic and repair-support features, including MOTOR TruSpeed™, Code Assist by Identifix, VW and Audi guided functions, and security gateway access through AutoAuth.
These resources help technicians access relevant diagnostic information and supported repair procedures. Optional X-431 Fix functionality provides additional repair information, including wiring diagrams, technical service bulletins, and component locations.
The X-431 Torque Link features a 10.1-inch touchscreen, Android 10 operating system, 2.0 GHz quad-core processor, and 4GB RAM.
Its 47.88Wh rechargeable battery supports portable diagnostic work, while Bluetooth connectivity and Wi-Fi software updates provide flexible communication and maintenance options.
The tablet also includes a 5MP front camera, 8MP rear camera, and adjustable kickstand for convenient operation in automotive service environments.
For automotive businesses planning to expand their services, the X-431 Torque Link supports optional diagnostic accessories and software for ADAS calibration, heavy-duty vehicle diagnostics, electric vehicles, powersports, battery testing, and additional specialized applications.
Compatible expansion options include select Launch X-431 ADAS calibration systems, the HD Add-on Module, BST360 battery tester, and X-Prog 3.
Note: Vehicle coverage and diagnostic functionality depend on the vehicle make, model, year, and system. ADAS calibration, J2534 programming, and certain diagnostic expansions may require separately purchased accessories, software, subscriptions, or OEM authorization.
Full-System Vehicle Diagnostics: Read and clear DTCs, access live data, perform actuation tests, and execute supported special functions.
Bidirectional Control: Command supported vehicle components to assist with system testing and fault identification.
Topology Mapping: Visualize electronic control modules and identify systems reporting faults.
SmartLink C VCI: Supports vehicle communication, remote diagnostics, and J2534 pass-thru capability.
Tech 2 Tech Remote Diagnostics: Enables remote diagnostic assistance and technician collaboration.
Automatic VIN Identification: Identifies compatible vehicles to streamline diagnostic setup.
Advanced Communication Protocols: Supports CAN FD, DoIP, and OBD II diagnostic functions.
Professional Repair Resources: Includes access to supported MOTOR TruSpeed™, Identifix Code Assist, and VW/Audi guided functions.
Security Gateway Support: Supports AutoAuth security gateway access on applicable vehicles.
10.1-Inch Touchscreen: Provides a convenient interface for diagnostic navigation and vehicle information.
Android-Based Hardware: Android 10, 2.0 GHz quad-core processor, and 4GB RAM.
Rechargeable Battery: 47.88Wh battery rated at 7.6V and 6300mAh.
Wi-Fi Software Updates: Supports online diagnostic software updates.
Expandable Functionality: Compatible with select optional ADAS, heavy-duty, EV, battery testing, and specialty diagnostic equipment.
We currently ship to the United States and Canada.
Canada: Please contact us directly to place your order. Shipping to Canada must be arranged over the phone.
We strive to get your equipment to you quickly and efficiently. Please note that order processing typically takes 1-2 business days, after which we will update you with tracking information.
For larger equipment/products, please allow 2-4 business days for pick and pack preparation. Once shipped, you will receive tracking information to stay up-to-date on the status of your order.
Small items (eg. Tablets & tools) | 3-5 business days
Large items (eg. Calibration Targets and Plates) | 5-8 business days
Full calibration packages | 8-10 business days
We want to ensure you're completely satisfied with your purchase. If you need to return an item, please contact our customer service team within 30 days of purchase. A 15% restocking fee will apply to all returns. The customer is responsible for return shipping costs. Refunds will be processed once the returned items are received and inspected at the warehouse.
All package sales are final due to the complexity of shipping the equipment. The total purchase price should be paid in full before shipment. When items are passed to the shipping carrier they are responsible for delivery. The equipment is covered solely by the manufacturer's warranty. The Buyer should inspect the equipment upon receipt and notify the Seller of any discrepancies as soon as possible. Let's get calibrating!
