Real techs remote into your computer and walk you through ADAS calibrations, diagnostic troubleshooting, and OEM programming live.
No commitment. Card on file, only billed if you continue past 30 minutes.
New customers get their first 30 minutes free — no charge unless you continue
Book free session ↗What we help with
From target setup to module flashes — if it’s holding the car hostage in your bay, we’ll work it with you.
If your tool supports it, we can help you run it
OEM coverage
Current coverage includes the brands below. We’ll expand this list as we add more OEM access.
More makes will be added as coverage expands.
How it works
New to remote support? It’s simpler than it sounds — you stay on the tool, we guide on screen.
Pick a time that works and fill out the intake form — vehicle, tool, and what you’re stuck on.
Attach scan reports, photos, or trouble tree docs right at booking so our tech preps before the call.
Your confirmation email has the link. Two-minute install on the computer running your tool.
Our tech connects to your screen, you follow along on the vehicle, and the job gets done.
Pricing
No surprise charges. Nothing charged at booking — your card stays on file and you’re billed after the session.
Live screen-share session with an ADAS Depot tech, on your tool, on your vehicle.
Only if you choose to continue. Tallied and billed after the session ends.
Try it on a real job. No charge unless you continue past the free window.
No charge at booking — card on file only, securely stored by Stripe.
Why ADAS Depot live support
Real experience on Autel, Launch, and the rest — not a call center reading a script.
Calibrations and module work covered in the same session — no bouncing between vendors.
No per-tool subscription. Whatever scan tool you run, we work with what’s in your bay.
Upload scan reports and photos at booking so the session starts at the problem, not at hello.
You’re talking to a tech in the States, live, during your shop hours.
FAQ
For ADAS calibrations we work with most makes and models on the road. For OEM programming, current coverage includes Toyota, Honda / Acura, GM, Ford / Lincoln, Nissan / Infiniti, Mopar, Mazda, BMW, and Audi / VW. We’re actively adding more.
On the tool side: Autel, Launch, OEM tools, and J2534 setups. If your tool supports the procedure, we can help you run it. Not sure whether your vehicle or tool is covered? Put it in the intake form and we’ll confirm before the session.
Just TeamViewer on the computer running your tool. The install link is in your confirmation email and takes about two minutes. Have the tool connected to the vehicle before we go live.
Your card goes on file at booking, but nothing is charged then. After the session, you’re billed for the time used: $150 for the first 30 minutes, then $50 per additional 10 minutes. New customers get their first 30 minutes free. If the job’s done inside that window, you pay nothing.
You’re only billed for the time used. No flat fee for an unfinished job. We’ll document exactly where the procedure stands and what’s next, so a follow-up session picks up where we left off instead of starting over.
No. Files you upload are used to prep and run your session, period. They’re not shared outside ADAS Depot. Remote access ends the moment the session does. You can watch the connection close on your screen.
Same scheduler, any time. Your shop info and card stay on file so a follow-up takes about a minute to book. Just attach any new scan reports so the tech is current before connecting.
The free first 30 minutes is a one-time deal for new customers, one per shop. After that, every session is the standard rate, billed only for time used.
Book your session
New customer? Your first 30 minutes are on us. Card on file at booking — nothing charged today.
On mobile, open the scheduler in a new tab for a cleaner booking experience.
Schedule Appointment