close
close
click to zoom in

have questions?

Bendpak

BendPak 10APX Two-Post Car Lift - 10,000-lbs. Capacity - High-Rise

$6,895.00
SKU:
5175306

Authorized distributer of Bendpak

BendPak 10APX Two-Post Car Lift - 10,000-lbs. Capacity - High-Rise

$6,895.00

BendPak 10APX Two-Post Car Lift - 10,000-lbs. Capacity - High-Rise

The BendPak 10APX High-Rise Two-Post Car Lift (SKU 5175306) is a professional automotive lifting solution designed for repair shops, service centers, and technicians requiring additional working height and flexible vehicle positioning. With a 10,000-lb lifting capacity, a 79.5-inch lifting height with pads, and a 157-inch overall height, this heavy-duty two-post lift provides convenient under-vehicle access for inspections, maintenance, and automotive repairs.

Built for servicing passenger cars, SUVs, light trucks, and compatible electric vehicles, the BendPak 10APX combines an adaptable clearfloor configuration with adjustable column spacing. Its expandable overhead beam allows installation in narrow or wide configurations, helping shops accommodate different vehicle sizes and service bay layouts.

Flexible Vehicle Positioning and Extended Arm Reach

The BendPak 10APX incorporates Bi-Metric™ arm technology, allowing technicians to use symmetric or asymmetric vehicle positioning. Four triple-telescoping swing arms provide additional reach and flexibility when accessing different manufacturer-designated lifting points.

The Low-Pro™ arm design helps technicians position the lift arms beneath vehicles with lower ground clearance. Adjustable screw pads with polyurethane contact surfaces provide additional flexibility when engaging vehicle lifting points.

Advanced Safety and Hydraulic Lifting System

Equipped with BendPak's Automatic Swing Arm Restraint System (ASARS), the 10APX helps secure the lifting arms during vehicle service. The automatic restraints provide 360-degree engagement and are engineered to withstand more than 2,000 lbs. of side force.

Dual hydraulic direct-drive cylinders power the lifting mechanism, while mechanical safety locks positioned at 3-inch intervals in each column provide additional protection. A single-point safety release simplifies lowering operations, and a padded overhead safety shutoff bar provides additional operational protection.

High-Rise Design for Professional Automotive Service

The BendPak 10APX offers a 75.5-inch rise and a 79.5-inch lifting height with pads, providing additional clearance for technicians working beneath elevated vehicles.

Its adjustable overall width of 135–145 inches and 157-inch overhead structure help accommodate professional service bay requirements. A 5 HP hydraulic power unit operates on 208–230V, 60 Hz, single-phase electrical power, with a manufacturer-listed lifting time of approximately 45 seconds.

Whether performing routine maintenance, undercarriage inspections, suspension repairs, or general automotive service, the BendPak 10APX 10,000-lb two-post car lift provides a combination of lifting height, adjustable positioning, and professional shop functionality.

Key Features

  • 10,000-lb Lifting Capacity: Supports compatible vehicles within the specified lifting capacity, with a maximum rated load of 2,500 lbs. per arm.

  • High-Rise Lifting Design: Provides a 75.5-inch rise and 79.5-inch lifting height with pads.

  • Adjustable Lift Width: Offers 135–145 inches of overall width to accommodate different installation configurations.

  • 157-Inch Overall Height: High-rise overhead structure provides additional vertical working space.

  • Bi-Metric™ Arm Configuration: Supports symmetric and asymmetric vehicle positioning.

  • Four Triple-Telescoping Arms: Extended arm adjustment helps technicians access different vehicle lifting points.

  • Low-Pro™ Swing Arms: Low-profile arm geometry helps accommodate vehicles with reduced ground clearance.

  • Automatic Swing Arm Restraint System: Provides 360-degree arm restraint engagement and resistance to more than 2,000 lbs. of side force.

  • Dual Hydraulic Direct-Drive Cylinders: Provide hydraulic lifting power for professional vehicle service.

  • Mechanical Safety Locks: Feature 3-inch lock intervals in both columns and a convenient single-point safety release.

  • Adjustable Screw Pads: Provide 2 inches of pad adjustment for vehicle contact positioning.

  • 5 HP Hydraulic Power Unit: Operates on 208–230V, 60 Hz, single-phase power.

  • Adaptable Clearfloor Design: Keeps the floor area between lift columns unobstructed by a floor-level crossbeam.

  • ALI Certified: Identified by BendPak as ALI certified.

 

 

 

Shipping Countries

We currently ship to the United States and Canada.

Canada: Please contact us directly to place your order. Shipping to Canada must be arranged over the phone.

General Order Processing Times

We strive to get your equipment to you quickly and efficiently. Please note that order processing typically takes 1-2 business days, after which we will update you with tracking information.

For larger equipment/products, please allow 2-4 business days for pick and pack preparation. Once shipped, you will receive tracking information to stay up-to-date on the status of your order.

General shipping times:

Small items (eg. Tablets & tools) | 3-5 business days

Large items (eg. Calibration Targets and Plates) | 5-8 business days

Full calibration packages | 8-10 business days

Return Policy

We want to ensure you're completely satisfied with your purchase. If you need to return an item, please contact our customer service team within 30 days of purchase. A 15% restocking fee will apply to all returns. The customer is responsible for return shipping costs. Refunds will be processed once the returned items are received and inspected at the warehouse.

Complete Packages

All package sales are final due to the complexity of shipping the equipment. The total purchase price should be paid in full before shipment. When items are passed to the shipping carrier they are responsible for delivery. The equipment is covered solely by the manufacturer's warranty. The Buyer should inspect the equipment upon receipt and notify the Seller of any discrepancies as soon as possible. Let's get calibrating!

Icon Hot
Icon Hot