The Autel MA800AS Mobile ADAS Calibration Package is a comprehensive calibration solution designed to provide coverage across all ADAS systems supported by the included equipment and targets. Built around the portable MA800 calibration frame, this package combines laser-guided positioning technology with an expanded selection of targets, calibrators, and accessories for professional ADAS calibration applications.
The MA800 frame breaks down into four pieces for easier transportation and storage, making the system suitable for shops that need a flexible mobile calibration setup. Its laser components assist with vehicle centerline identification and accurate target positioning, helping technicians establish the required calibration geometry efficiently. Independent pitch, roll, and yaw adjustments allow precise positioning of the calibration frame.
During setup, the system checks critical measurements including target height, target distance, and vehicle-to-frame distance against OEM-specified tolerances before calibration begins. Setup measurements are transmitted to a compatible Autel MaxiSYS ADAS-capable tablet for OE-tolerance verification and validated reporting, helping technicians document the calibration setup.
The MA800AS includes an expanded Lane Departure Warning (LDW) target package supporting Honda and Acura, Hyundai and Kia, Mazda, Mercedes-Benz, Mitsubishi, Nissan and Infiniti, Subaru, Toyota and Lexus, Volkswagen, Audi and Porsche, and Alfa Romeo applications. Additional included targets, calibrators, and equipment support Around View Monitoring (AVM), rear camera, Honda LaneWatch, Adaptive Cruise Control (ACC), Blind Spot Detection (BSD), night vision, and LiDAR calibration on applicable supported vehicles.
The hardware package includes the MA800 frame, integrated tablet holder, left and right positioning laser units, alignment stand, laser measure unit, two two-line lasers—including one for vehicle centerline identification—a laser plate, laser-assisted reflector, two rechargeable battery packs, and a power adapter. A target flight case is also included for convenient storage and transportation of smaller targets.
An ADAS calibration software upgrade card is included, adding calibration coverage to a compatible MaxiSYS tablet and providing 12 months of calibration coverage updates. The MA800AS hardware is covered by a one-year limited warranty.
Important: A compatible Autel MaxiSYS ADAS-capable tablet is required and is not included with the MA800AS package.
Comprehensive mobile ADAS calibration package for all systems supported by the included targets and calibration equipment
MA800 calibration frame breaks down into four pieces for convenient transport and storage
Laser-guided vehicle centerline identification and target positioning
Independent pitch, roll, and yaw adjustment for precise frame positioning
Checks target height, target distance, and vehicle-to-frame distance against OEM-specified tolerances
Transmits setup measurements to a compatible MaxiSYS tablet for verification and validated reporting
Expanded LDW target coverage for Honda, Acura, Hyundai, Kia, Mazda, Mercedes-Benz, Mitsubishi, Nissan, Infiniti, Subaru, Toyota, Lexus, Volkswagen, Audi, Porsche, and Alfa Romeo
Includes equipment for supported AVM, rear camera, Honda LaneWatch, ACC, BSD, night vision, and LiDAR calibration applications
Includes left and right positioning lasers, laser measure, two two-line lasers, laser plate, and laser-assisted reflector
Integrated tablet holder keeps a compatible MaxiSYS tablet accessible during calibration
Includes two rechargeable battery packs and a power adapter
Target flight case included for small-target storage and transportation
Includes ADAS calibration software upgrade card with 12 months of calibration coverage updates
Hardware covered by a one-year limited warranty
Requires a compatible Autel MaxiSYS ADAS-capable tablet; tablet is not included
We currently ship to the United States and Canada.
Canada: Please contact us directly to place your order. Shipping to Canada must be arranged over the phone.
We strive to get your equipment to you quickly and efficiently. Please note that order processing typically takes 1-2 business days, after which we will update you with tracking information.
For larger equipment/products, please allow 2-4 business days for pick and pack preparation. Once shipped, you will receive tracking information to stay up-to-date on the status of your order.
Small items (eg. Tablets & tools) | 3-5 business days
Large items (eg. Calibration Targets and Plates) | 5-8 business days
Full calibration packages | 8-10 business days
We want to ensure you're completely satisfied with your purchase. If you need to return an item, please contact our customer service team within 30 days of purchase. A 15% restocking fee will apply to all returns. The customer is responsible for return shipping costs. Refunds will be processed once the returned items are received and inspected at the warehouse.
All package sales are final due to the complexity of shipping the equipment. The total purchase price should be paid in full before shipment. When items are passed to the shipping carrier they are responsible for delivery. The equipment is covered solely by the manufacturer's warranty. The Buyer should inspect the equipment upon receipt and notify the Seller of any discrepancies as soon as possible. Let's get calibrating!
Autel
Autel
Autel
Authorized distributer of 
